Geometric Alignment Of Pad Surface To Disc Surface (basic bedding in) 4-6 brake applications with medium pedal pressure from approx 90mph to 50mph, not allowing wheels to lock. (No brake dragging) Allow for a distance of 300 - 400metres between brake applications for cooling period. Pads should not reach temperatures above 400°C during initial bedding in. Check that pad surfaces have at least 80% contact with disc before allowing more heat into pad surface. Immediately followed by :
Repeat high speed applications including recovery applications another 2-3 times. NOTE: Allow a cooling off distance of 500 metres between high speed application |
![]() |